Guide · Clubs and landowners · 3 min read · Updated 17 November 2026
Padel Court Dimensions: How Much Space Do You Need?
Short answer
A padel court has a 20m by 10m playing area enclosed by walls of glass and mesh, typically around 4 metres high at the ends. You need extra space outside the enclosure for construction, access, maintenance and, for panoramic courts, any external supports. Many projects allow a plot of at least around 21m by 11m per court, more for circulation, lighting and spectators.
The playing area
Padel is played on a rectangular court 20 metres long and 10 metres wide, measured inside the walls. A net divides it into two halves of 10 by 10 metres. Service lines run parallel to the net, and a central service line divides each service area in two. Because the walls are part of play, their size, material and position are standardised by the court manufacturer to meet the rules of the game.
The court is enclosed on all sides. Openings in the side walls give player access, either on one side or both, depending on the design.
| Feature | Typical dimension or arrangement |
|---|---|
| Playing area | 20m long by 10m wide, inside the walls |
| Net | Across the middle, dividing two 10m by 10m halves |
| End walls | Glass with mesh above, around 4m high overall |
| Side walls | Glass sections near the ends, mesh along the middle |
| Access openings | In the side walls, one or both sides |
| Surface | Artificial turf with sand infill on a level base |
Space around the court
The base and the court frame need a margin beyond the 20 by 10 metre playing area. The frame posts and glass sit on the outside edge, and the base slab usually extends past them. Beyond that, plan for a working strip during construction so installers can lift glass panels into place, and a permanent path or hardstanding for player access and maintenance.
Panoramic courts may have external supports or buttresses behind the glass, depending on the design, which can take extra space. Lighting columns, if not frame-mounted, need their own foundations. Spectator areas, benches and storage add more.
- Base slab extending beyond the frame
- Working space for glass installation
- Access path to the court doors
- Room for maintenance equipment and brushing
- Space for any external supports on panoramic designs
- Spectator, bench and storage areas
Plot size for one or more courts
A rule of thumb is to allow a plot of at least around 21 by 11 metres for the court itself, and more once access and surrounding space are added. For multi-court sites, courts are often built side by side, sometimes sharing walkways between them. The court manufacturer and contractor will produce a layout based on the chosen court design, access and drainage.
On constrained sites, measure carefully and include boundaries, trees, buried services and any slope. A plot that looks big enough on paper can become tight once a level platform is cut into a slope with batters or retaining edges.
Orientation and sun
Outdoor courts are commonly oriented with the long axis running roughly north to south. That reduces the time players at either end look straight into a low rising or setting sun, which is especially noticeable with glass walls reflecting light. Site constraints sometimes make this impossible, in which case trees, buildings or screening can help.
Think also about prevailing wind, overhanging trees that drop leaves onto the turf, and where floodlight spill and noise will travel. Orientation affects neighbours as well as players.
On exposed sites, strong winds can affect the ball over the mesh sections, so a sheltered position or windbreak planting can improve play. Keep courts clear of large trees, whose roots can also disturb the base over time.
Indoor and covered courts
Covered and indoor courts need generous clear height above the playing surface because padel involves high lobs. Governing body and manufacturer guidance on minimum clear height should be followed, and is often 6 metres or more. Lights, beams, ducts and sprinklers must sit above that clear zone. Canopies need foundations for their columns outside the court frame, adding to the overall footprint.
Converting an existing building, such as a warehouse or barn, depends on its internal height, column spacing and floor. Many industrial buildings have columns that make a 20 by 10 metre court plus surrounds difficult to fit.
| Setting | Key space consideration |
|---|---|
| Outdoor court | Orientation, drainage, access |
| Canopy-covered court | Column foundations outside the frame, clear height |
| New indoor building | Clear height, spacing between courts, circulation |
| Converted building | Existing column positions, floor and headroom |
Fitting courts onto existing sites
Many padel projects reuse space already given over to sport, such as a tired tennis court, a hard-surfaced games area or part of a car park. A single tennis court footprint is larger than a padel court, and some sites fit two padel courts where one tennis court stood, depending on the layout and surrounding space. The existing surface is rarely suitable as it is, because padel bases need tighter flatness tolerances, but the existing sub-base can sometimes be reused after testing.
Reusing a site can cut groundwork costs and may be viewed more favourably in planning terms, although new walls, lights and noise will still be assessed.
Ground levels and drainage
Padel courts must be very flat, so the base is built to tight tolerances set by the court maker. On sloping ground, that means cutting into the high side, building up the low side, or both, with retaining edges or graded banks. Drainage around the court perimeter is essential to stop water running onto the base. These works add to the overall footprint and cost.
We arrange padel court projects through vetted, insured specialist contractors. Send a site plan and photos through the quote form and you will receive one all-in price for your scheme.
Questions people also ask
What are the dimensions of a padel court?
A padel court measures 20 metres long by 10 metres wide inside the walls, with a net dividing it into two 10 by 10 metre halves. It is enclosed by glass and mesh walls, typically around 4 metres high at the ends.
How much land do I need for a padel court?
Allow at least around 21 by 11 metres for the court and base, and more for access paths, construction working space and any spectator area. Sloping sites need extra room for banks or retaining edges around the level platform.
Which way should a padel court face?
Outdoor courts are commonly oriented with the long axis running roughly north to south. That reduces how often players look directly into a low rising or setting sun. Site constraints, neighbours and lighting spill can also influence the final orientation.
Written and checked by the Padel Court Construction team. Read our editorial policy.
More guides
How Much Does a Padel Court Cost to Build in the UK?
A standard outdoor padel court in the UK typically costs £22,000–£35,000 for the court kit supplied and installed, plus £12,000–£25,000 for…
Do You Need Planning Permission for a Padel Court?
Most padel courts in the UK need planning permission. The enclosure is usually around 4 metres high, which exceeds permitted development limits for…
Panoramic vs Standard Padel Court: Which Should You Build?
A standard padel court has steel posts between the glass panels, while a panoramic court uses special fixings so the glass back walls are post-free…
How a Padel Court Is Built: Stages and Timeline
Building a padel court runs through feasibility, planning, groundworks and base, then court installation, turf and lighting. Planning decisions on…
Get a free padel court construction quote
Tell us what you need and we'll come back with a clear price.
Request a quote